BLENDER K400 - ARTISAN - Appelrood | KitchenAid BE (2024)

FAQs

Is the Kitchen Aid blender worth it? ›

Compared To Other Blenders. The KitchenAid K400 is a great all-around blender that performs well regardless of what you're blending. It also supports hot blending, so you can do soups or other hot mixes, like most KitchenAid blenders we've reviewed. It's also very well-built.

Press POWER to turn off the Blender, then unplug the Blender. Plug the Blender back in and press POWER to turn back on to reset the stuck key.

If your blender stops while blending, it may have become overloaded or jammed when blending heavy ingredients. It will automatically shut off to prevent damage to the motor.

If KitchenAid Blender Jar is leaking

The gasket/sealing ring may be damaged, missing or upside down. The gasket is ridged, and the flat sides should rest on the collar. It's important to make sure the sealing ring is flat side down to prevent leaking.

Vitamix blenders are known for their powerful performance in breaking down tough ingredients with ease and their high-quality construction. These models are also long-lasting and easy to use. The main downsides of these blenders are that they can be expensive, heavy, and harder to clean than more compact options.

Blendtec takes the lead with a 3.0 peak HP motor in their Designer 650 when it comes to raw power compared to Vitamix's 2.2 HP motor. It's worth noting that Blendtec offers an even more powerful 3.8 peak HP motor in their higher-end models. That's enough power to blend a garden rake!

Place a wet, warm towel around the bottom of the bowl for 10 minutes. Re-warm it after the 10 minutes, put it on again, and let it sit for 1 -2 more minutes. This will re-warm the stainless steel, causing it to expand. After this time, try to wiggle and remove the bowl.

The most common problem is caused by the jar leaking liquids. The solution is to tighten the base. If this doesn't solve the problem, inspect and, if necessary, replace the gasket. If the drive stud is turning but the blade assembly isn't, inspect the assembly socket into which the drive stud fits.

How long is KitchenAid blender warranty? ›

Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service. If your Blender should fail within the first year of ownership, take the Blender or ship collect to an Authorized KitchenAid Service Centre.

To clean the blender base and cord: Unplug the blender before cleaning. Wipe the base and the cord with a warm, damp cloth; wipe clean with a damp cloth, and dry with a soft cloth. To clean the jar: Make sure you clean the blender jar, lid and ingredient-measuring cap after every use.

If it is leaking from the top, then it is likely it has been overfilled. If it is leaking from the bottom, make sure the base in screwed on tightly and that the rubber seal is in place. If this is missing or damaged, then the blender is not watertight. A replacement seal is needed.

🔎 Cuisinart Precision Stand Mixer is best for large volume bakes and recipes. KitchenAid vs Cuisinart: the debate rages on. If you're catering for a crowd, you'll appreciate the Precision's bigger bowls and larger selection of speed settings, as well as its much more reasonable price.

KitchenAid has established itself as a brand that crafts durable and high-quality appliances. These appliances are meticulously built to withstand the rigors of daily culinary adventures. Crafted with precision and using high-grade materials, these appliances are built to last a lifetime.

So, is it worth it to buy an expensive, high-powered blender? If cost is no object and the smoothest soups and sauces are more important to you than saving for retirement, then, yes, definitely. I'm certainly glad I own mine. If not, don't feel too bad—our top affordable picks have you covered.

KitchenAid stand mixers are totally worth it

I've never regretted buying my Artisan mixer, and know it will be with me for a good few years yet. But if you're not up to forking out $449 for an Artisan Series 5 quart tilt head stand mixer, you could opt for a mini version at $380, with a 3.5-quart capacity.